10.17
Adjusting the seat height
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride
behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
–
Place the handlebar support in the required position. Mount
and tighten screws
Guideline
Screw, handle-
bar support
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamps. Mount screws
evenly.
Guideline
Screw, handlebar
clamp
Info
Make sure the gap widths are even.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Remove nut
A00095-10
–
Hold the rear wheel with the swingarm and remove
2
screw
.
–
Position the shock absorber according to the required seat
height.
Guideline
Low seat position (standard)
High seat position
–
Position screw
K00651-10
10 TUNING THE CHASSIS
2
.
M10
40 Nm (29.5 lbf ft)
M8
20 Nm (14.8 lbf ft)
p. 43)
.
A
B
2
.
®
Loctite
243™
1
and tighten
41