Removing The Start Number Plate - Husqvarna TC 50 Owner's Manual

Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
11.16

Removing the start number plate

11 SERVICE WORK ON THE CHASSIS
Main work
–
Check the throttle cable routing. (
–
Mount fuel hose
K00664-11
–
Position the fuel tank.
–
Make sure that no cables or throttle cables are trapped or
damaged.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Position the fuel tank breather in the steering stem.
K00663-11
Finishing work
–
Install the left side cover. (
–
Install the right side cover. (
–
Mount the seat. (
–
Remove screw
–
Unhook the start number plate from the brake line and
remove it.
A00103-10
p. 74)
1
.
2
.
M6 10 Nm (7.4 lbf ft)
p. 60)
p. 58)
p. 63)
1
.
55