Husqvarna TC 50 Owner's Manual page 88

12 BRAKE SYSTEM
86
Warning
Danger of accidents Old brake fluid reduces the braking effect.
–
Make sure that brake fluid for the front and rear brake is changed in accordance with the service
schedule. (Your authorized Husqvarna Motorcycles workshop will be glad to help.)
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
H01448-10
H01654-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Check the rear brake linings. (
Main work
–
1
Remove screws .
–
2
Take off cover with washer
–
Add brake fluid up to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 ( p. 127)
–
Position the cover with the washer and membrane.
–
Mount and tighten the screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Remove the motorcycle from the lift stand. (
p. 43)
p. 87)
3 4
and membrane .
A
.
10 mm (0.39 in)
p. 43)