Table of Contents
Advertisement
11.36
Removing the engine sprocket cover
11 SERVICE WORK ON THE CHASSIS
Main work
–
Remove screws with toothed washers
cap
2
.
–
Remove end cap and outer tube
–
Remove glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount the new glass fiber yarn filling on the inner tube.
700514-01
–
Slide the outer tube over the glass fiber yarn filling.
–
Insert the end cap into the outer tube.
–
Mount and tighten the screws with the toothed washers.
Guideline
Remaining screws,
chassis
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
–
Mount the seat. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(TC 50)
–
Remove screws
–
Remove screw
–
Take off the engine sprocket cover.
A00080-10
(TC 50 Mini)
–
Remove screws
–
Remove screw
–
Take off the engine sprocket cover.
A00100-10
1
from the silencer
3
.
4
from the inner tube.
M6
10 Nm (7.4 lbf ft)
p. 66)
p. 58)
p. 63)
p. 43)
1
.
2
.
1
.
2
.
67
Advertisement
Table of Contents
