11.43
Adjusting the chain guide
Info
The size of the chain wheel varies with the number of teeth. The chain guide can be adjusted on small
sprockets.
11 SERVICE WORK ON THE CHASSIS
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
»
If the light part of the chain guide is worn:
–
Change the chain guide.
400985-01
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining
screws, chassis
H00095-01
Finishing work
–
Install the engine sprocket cover. (
–
Remove the motorcycle from the lift stand. (
–
Loosen screw
–
Position the chain guide.
–
Tighten the screw.
Guideline
Remaining screws,
chassis
H00096-10
M6
p. 68)
1
.
M6
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
p. 43)
73