Replacing The Pcie Cable - Hitachi G200 Service Manual

Replacing the PCIe cable

Procedure
1.
2.
3.
4.
5.
300
Remove the PCIe cable from the PCIe module on the CBLH and from the
PCIE cable connector on the host port expansion chassis connected to
the CBLH.
Loosen the two blue screws that secure the PCIe module.
Hold the blue screw, and then pull out the PCIe module slightly.
Wait 30 seconds, and then gently insert the PCIe module all the way into
the slot.
Tighten the two blue screws to secure the PCIe module.
Replacing a PCIe cable
Service Guide for VSP Gx00 and VSP Fx00 Models