Replacing The Bkm Backup Module; Replacing A Bkmf - Hitachi G200 Service Manual

Next steps
If Warning appears for BKM Status and ? appears for the Battery
Lifespan Remaining values of the batteries, resolve the Warning for BKM
Status so the ? returns to a numeral value.

Replacing the BKM backup module

Use the following procedure to replace the BKM backup module.
Procedure
1. Loosen the blue screw that secures the BKM.
2. Open the lever forward.
3. Using both hands, hold the body of the BKM, and then pull out and
remove the BKM.
4. With the lever of the BKM opened forward, insert the new BKM into the
slot.
5. Push the BKM all the way into the slot.
6. Close the lever and tighten the blue screw to secure the BKM.
7. Confirm that the green STATUS LED on the BKM is blinking.
8. In the BKMS tab of the maintenance utility, check that the status of the
BKM you replaced is Normal.
9. Log out and close the Maintenance Utility window

Replacing a BKMF

The following sections describe how to replace a BKMF backup module.
Replacing a backup module
Service Guide for VSP Gx00 and VSP Fx00 Models
271