Blocking The Cfm - Hitachi G200 Service Manual

Blocking the CFM

Procedure
1.
2.
3.
4.
5.
6.
7.
252
Start the maintenance utility.
Click Hardware > Controller Chassis.
In the Controller Chassis window, click the CFMs tab.
To display the most recent status of the CFM, click Refresh.
Confirm that the status of the CFM to be replaced is Warning.
Click the CFM to be replaced, and then click Replace.
When the Replace Cache Flash Memory window opens, confirm that
the CFM shown in the window is the one to be replaced, and then
clickBlock.
Replacing cache flash memory
Service Guide for VSP Gx00 and VSP Fx00 Models