Hitachi g800 Reference Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Storage
  5. Virtual Storage Platform G800
  6. Reference manual

Hitachi g800 Reference Manual

Virtual storage platform
Hide thumbs Also See for g800:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Administration Manual, Service Manual
Hitachi Virtual Storage Platform G800
Hardware Reference Guide
MK-94HM8026-04
June 2016

Advertisement

Table of Contents
loading

Related Manuals for Hitachi g800

Summary of Contents for Hitachi g800

  • Page 1 Hitachi Virtual Storage Platform G800 Hardware Reference Guide MK-94HM8026-04 June 2016...
  • Page 2 Materials. “Materials” mean text, data, photographs, graphics, audio, video and documents. Hitachi reserves the right to make changes to this Material at any time without notice and assumes no responsibility for its use. The Materials contain the most current information available at the time of publication.

  • Page 3: Table Of Contents

    Block configuration....................19 File- and block-level configuration................19 Hitachi Virtual Storage Platform G800 model............19 Features........................ 21 Scalability......................21 Examples of supported Hitachi Virtual Storage Platform G800 configurations..21 Maximum number of mounted drive trays............21 Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 4 Host port expansion chassis power supply............49 Hitachi Virtual Storage Platform SVP server.............. 50 Service processor description................50 SVP front panel....................51 SVP rear panel....................51 3 System option modes..............53 System Option Modes.....................54 Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 5 Hitachi Virtual Storage Platform G800 mechanical specifications.......108 Electrical specifications..................114 Environmental specifications................. 115 Battery specifications....................118 RAID specifications....................118 iSCSI specifications....................119 iSCSI standards....................122 Regulatory compliance..................122 Dense intermix drive tray connection restrictions............ 123 SVP hardware specifications.................. 123 Index....................125 Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 6 Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 7: Preface

    Intended audience □ Product version □ Release notes □ Changes in this revision □ Document conventions □ Conventions for storage capacity values □ Accessing product documentation □ Getting help □ Comments □ Preface Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 8: Safety And Environmental Notices

    Backup Hitachi cannot guarantee against data loss due to failures. Therefore, back up your data to minimize chances for data loss. Data backup is also critical when hardware components are added or replaced, because performing such hardware procedures restores parameter settings that can affect how data is managed on the storage systems.

  • Page 9: General Safety Guidelines

    DAMAGE. Notes on use When using the Hitachi storage system, be sure to read this guide and understand the operating procedures and instructions described herein thoroughly before staring your operation. The array complies with FDA radiation performance standard 21 CFR subchapter J.

  • Page 10: Handling Of Heavy Parts

    • Do not supply power to any device with rotating or moving parts that are not properly covered. • Tuck in your tie, scarf, shirt, or any other loose clothing to prevent it from getting caught by a rotating or moving part. Preface Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 11: Preventing Machine Damage

    • Keep these vents open and be sure they are not blocked to keep the storage system ventilated. Cool air enters the storage system from the air vent on the front panel and exits through the vent on the rear panel. Preface Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 12: Procedures In An Emergency

    • If the fire continues to burn after the power is shut off, take suitable actions, including the use of a fire extinguisher, or call the fire department. Intended audience This document is intended for system administrators, Hitachi Data Systems representatives, and authorized service providers who install, configure, or operate VSP Gx00 models .

  • Page 13: Product Version

    (For exceptions to this convention for variables, see the entry for angle brackets.) Indicates text that is displayed on screen or entered by the user. Example: Monospace pairdisplay -g oradb < > angle brackets Indicates variables in the following scenarios: Preface Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 14: Conventions For Storage Capacity Values

    1 petabyte (PB) 1,000 TB or 1,000 bytes 1 exabyte (EB) 1,000 PB or 1,000 bytes Logical storage capacity values (for example, logical device capacity) are calculated based on the following values: Preface Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 15: Accessing Product Documentation

    Getting help Hitachi Data Systems Support Connect is the destination for technical support of products and solutions sold by Hitachi Data Systems. To contact technical support, log on to Hitachi Data Systems Support Connect for contact information: https://support.hds.com/en_us/contact-us.html. Hitachi Data Systems Community...
  • Page 16 Preface Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 17: Product Overview

    The storage system allows a defective controller to be replaced. The Virtual Storage Platform G800 can be equipped with NAS modules. The NAS modules provide file access through CIFS, NFS and FTP protocols and block access using iSCSI protocols in addition to the block access provided directly by iSCSI and FC I/O modules.
  • Page 18 Features □ Scalability □ Product overview Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 19: Block Configuration

    With host port expansion chassis chassis Front end module With HDD Without HDD With HDD Without HDD 8 GB Fibre Channel ports/system 16 GB Fibre Channel ports/system 10 GB iSCSI ports/ system Product overview Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 20 • PCIe cable connector on page 47 • Host port expansion chassis power supply on page 49 • Examples of supported Hitachi Virtual Storage Platform G800 configurations on page 21 Product overview Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 21: Features

    Scalability All storage systems offer pay-as-you-grow scalability by allowing you to hot- add drives as you need them. Examples of supported Hitachi Virtual Storage Platform G800 configurations Maximum number of Drive tray Maximum number of drives supported...
  • Page 22 Maximum number of drives Drive trays Maximum number CBLH 1152 HDDs or SSDs CBLH 576 HDDs or SSDs CBLH 576 FMDs (HAF) CBLH Dense intermix drive 1440 HDDs or SSDs tray Product overview Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 23: Hardware Description

    The following sections describe the storage system hardware. Storage system controllers □ Controller interfaces □ Storage system drive trays □ Host port expansion chassis □ Hitachi Virtual Storage Platform SVP server □ Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 24: Storage System Controllers

    Note: When System Option Mode 1097 is set to ON, the WARNING LED does not blink even if the following failure information issues SIM: Failure information SIM: 452xxx, 462xxx, Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 25: Cblh Front Panel Without Bezel

    CBLH front panel without bezel Number Item Description POWER ON/OFF (main switch) Powers the storage system. See the previous table. POWER, READY, WARNING, ALARM LEDs Controllers Controller 1 (bottom) and Controller 2 (top). Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 26: Cblh Rear Panel

    Off: Battery is not mounted, battery-mounting failure occurred, or firmware is being upgraded. Off is normal status for configurations with no batteries (for example, BKMF-10 and BKMF-20). CBLH rear panel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 27 Number Item Power supply unit Front end module Back end module LAN blade Rear view (includes NAS modules) Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 28: Controller Interfaces

    Connect to Fibre Channel cables. STATUS LED Green: front end module is in power-on state. Red: front end module can be removed safely. PORT LED Red: Small form-factor pluggable can be removed. Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 29: Gbps Fibre Channel Board Leds And Connectors

    Port 2 Port 3 Port 4 CHB-1A CHB-1B CHB-1C CHB-1D CHB-1E CHB-1F CHB-1G CHB-1H CHB-2A CHB-2B CHB-2C CHB-2D CHB-2E CHB-2F CHB-2G CHB-2H 16 Gbps Fibre Channel board LEDs and connectors Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 30: Gbps Iscsi Board Leds And Connectors (Optical)

    16 Gbps Fibre Channel Ports (left to right) CHB# Port 1 Port 2 CHB-1A CHB-1B CHB-1C CHB-1D CHB-1E CHB-1F CHB-1G CHB-1H CHB-2A CHB-2B CHB-2C CHB-2D CHB-2E CHB-2F CHB-2G CHB-2H 10 Gbps iSCSI board LEDs and connectors (optical) Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 31: Gbps Iscsi Board Leds And Connectors (Copper)

    Blue: Normal link status. Blink blue: Front end module is in communication status. iSCSI connectors Connect to Ethernet LAN cables. 10 Gbps iSCSI board LEDs and connectors (copper) Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 32: Pcie Module

    Connect to Ethernet LAN cables. PCIe module Number Item Description Green: PCIe module is in the STATUS LED power-ON status. Red: PCIe module failure occurred. Off: PCIe module can be removed safely. Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 33: Lan Blade Leds And Connectors

    LAN port used by the user. LAN 1 Maintenance LAN port used by service personnel. LAN ALARM LED Red: LAN blade can be removed. Uninterruptible power supply port Back end module LEDs and connectors Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 34: Cblh Power Supply Unit Leds And Connectors

    CBLH power supply unit LEDs and connectors Number Item Description ALM/RDY LED Red: Power supply unit can be replaced. Receptacle Connect to the power cable supplied with the storage system. RDY LED Green: Normal operation. Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 35: Storage System Drive Trays

    The LED can be lit/turned off by Maintenance Utility to specify the chassis location. Lock Locks and unlocks the front panel bezel by using the supplied key. SFF front panel without bezel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 36: Sff Rear Panel

    POWER, READY, LOCATE LEDs See the previous table. Small form factor drives There are 24 2.5-inch small form factor drives oriented vertically. Slots are designated 0-23 (left to right). SFF rear panel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 37: Large Form Factor (Lff) Drive Tray

    Red: Power supply unit can be replaced. RDY LED Green: Normal operation. Large form factor (LFF) drive tray LFF with front panel bezel Number Item Description POWER LED Green: Drive tray is powered Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 38: Lff Front Panel Without Bezel

    Large Form Factor Drives There are 12 3.5-inch large form factor drives stacked horizontally. Slots are designated the following way: 10 11 LFF rear panel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 39: Flash Module Drive (Fmd) Tray

    AC IN LED Green: Normal operation. ALM LED Red: Power supply unit can be replaced. RDY LED Green: Normal operation. Flash module drive (FMD) tray FMD with front panel bezel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 40: Fmd Front Panel Without Bezel

    The LED can be lit or turned off by the maintenance utility. Lock Locks and unlocks the front panel bezel by using the supplied key. FMD front panel without bezel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 41: Fmd Rear Panel

    Twelve flash module drives. Flash module drives Slots are designated the following way: 9, 10, 11 6, 7, 8 3, 4, 5 0, 1, 2 FMD rear panel Number Item Description Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 42: Dense Intermix Drive Tray

    AC IN LED Green: power supply unit is operating normally. ALM REPLACE LED Red: power supply unit can be replaced. Dense intermix drive tray Dense intermix drive tray with front panel bezel Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 43: Dense Intermix Drive Tray Display Leds

    Dense intermix drive tray display LEDs Number Item Description Green: Normal operation. Blink green: Drive is being accessed. ALM LED Red: Drive stopped due to a failure and can be replaced. Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 44: Dense Intermix Drive Tray Rear Panel

    PATH (OUT)LED PATH (OUT) connector Connect to a drive tray. PATH (IN) LED Blue: IN side port is linked up. PATH (IN) connector Connect to a controller or drive tray. Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 45: Sff And Lff Ac Power Supply Unit Leds And Connectors

    Red: Power supply unit can be ALM LED replaced. Host port expansion chassis Related references • Hitachi Virtual Storage Platform G800 model on page 19 Host port expansion chassis front panel bezel LEDs Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 46: Pcie Switch Board

    Off: PCIe module is powered off. Safety lock Used to lock or unlock the front bezel. Related references • Hitachi Virtual Storage Platform G800 model on page 19 PCIe switch board Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 47: Host Port Expansion Chassis Fan

    Host port expansion chassis fan Number Item Description ALM LED Red: fan failure has occurred. Off: normal operation. Related references • Hitachi Virtual Storage Platform G800 model on page 19 PCIe cable connector Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 48 Off: basic PCIe is normal or not set. Link Option LED Green: option PCIe is Gen-3.0 (8 Gbps) and linked up normally Off: option PCIe is not linked up (PCIe cable might not be Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 49: Host Port Expansion Chassis Power Supply

    Green: normal operation. AC IN LED Blue: AC input is normal. Related references • Hitachi Virtual Storage Platform G800 model on page 19 Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 50: Hitachi Virtual Storage Platform Svp Server

    Service processor description VSP Gx00 models include a separate, dedicated 1U service processor (SVP) to host an element manager (Hitachi Device Manager - Storage Navigator). The SVP (model number 3919435.P) operates independently from the storage system's CPU and operating system, and provides out‑of‑band configuration and management of the storage system.

  • Page 51: Svp Front Panel

    • Applying Windows security patches. • Turning on automatic Windows updates or using the manual Windows update method. • Installing antivirus software that has been tested and approved by Hitachi. • Installing the latest SVP firmware releases from Hitachi. SVP front panel The SVP front panel has LEDs, a reset button, and a power button.
  • Page 52 Note: After the Initial Startup Wizard is run, the SVP can be used in non- bridge mode. In this mode, the cables can be removed from SVP ports LAN3 and LAN4 and attached to switches. For more information, contact customer support. Hardware description Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 53: System Option Modes

    System option modes System Option Modes □ System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 54: System Option Modes

    The following table was up to date at the time this manual was published. However, the System Option Mode information might change in firmware releases that precede the next release of this manual. Contact your Hitachi Data Systems team for the latest information about System Option Modes.
  • Page 55 Mode 122 = OFF： By specifying Split or Resync, Steady/Quick Split or Normal/ Quick Resync is respectively executed in accordance with Normal/Quick setting. For details, see the System Option Mode 122 sheet. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 56 Mode 448 = ON: (Enabled) If the SVP detects a blocked path, the SVP assumes that an error occurred, and then immediately splits (suspends) the mirror. Mode 448 = OFF: (Disabled) System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 57 The amount of the entire destage processing is periodically determined by using the highest workload of all CLPRs (*a). (The larger the workload is, the larger the amount of the entire destage processing becomes.) (for HUS VM) System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 58 System Option Mode 457 is ON, when selecting the external volume group and performing the LDEV format, any Write processing on the external LUs will be skipped. However, if System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 59 75% or larger. Mode 467 is to prevent the dirty percentage from over 60% so that the host performance is not affected. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 60 (SM Space Warning) Mode 471 = ON: This kind of SIMs is reported to maintenance personnel. Mode 471 = OFF: This kind of SIMs is not reported to maintenance personnel. Notes: System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 61 5. While the mode is set to ON, make sure not to perform micro-program downgrade to an unsupported version. 6. While the mode is set to ON, make sure not to perform the Take Over function. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 62 IO operation is online and its performance requirement is severe. 2. Whether the disconnecting status for each external volume is progressed or not cannot be confirmed on System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 63 Pending rate on RCU exceeds 60%. Mode 690 = OFF: Read JNL or JNL Restore is not prevented when the Write Pending rate on RCU exceeds 60% (the same as before). System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 64 VMA set, the VMA information cannot be read. 4. When the mode is set to ON while the following conditions are met, the external volume is blocked. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 65 HDD must be unmounted and remounted. Notes: 1. When the RAID level or emulation type is changed for the existing parity group, this option should be applied only if System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 66 Hitachi product is used as an external subsystem. 2. While USP V/VM is used as an external subsystem and its...
  • Page 67 Mode 733 = OFF: Volume Migration or Quick Restore operation during LDEV- related maintenance is not suspended. VSP and later models, HUS VM and later models: System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 68 SIM (SIM-RC625000) is repeatedly reported every eight (8) hours until the pool usage rate falls below the depletion threshold. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 69 Characteristic1 item from SYMMETRIX is changed. (2) When CheckPaths or Device Health Check (1/hour) is performed, the information of an already-mapped external volume is updated to the one after change. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 70 3. When 0 data discarding is executed, load may be unbalanced among pool volumes. 4. Pool VOL deletion while the mode is set to ON fails. To delete pool VOLs, set the mode to OFF. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 71 (4) To apply the mode to TC Sync, both MCU and RCU must be HUS VM and micro-program must be the support version System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 72 Mode 803 = OFF: While a DP pool VOL is blocked, if a read or write I/O is issued to the blocked pool VOL, the DRU attribute is not set to Protect. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 73 - Usage rate of a parity group to which the copy target LDEV belongs is low. - ShadowImage copy progress is delayed. 2. This mode is available only when System Option Mode 467 is set to ON. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 74 The mode enables or disables the background format function performed on an unformatted area of a DP/DT/TI*1 pool. *1: The background format function for a TI pool is only available for V01+1 (73-01-31-00/00) or higher. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 75 Notes: 1. Apply the mode when the usage of upper tier is low and that of lower tier is high. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 76 I/O synchronous copy change as follows. Mode 899 = ON: System option mode 900 is ON: I/O synchronous copy starts without retrying Volume Migration. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 77 Tier Level ALL when the drive type of tier1 is SSD changes as follows. Mode 901 = ON: For tier1 (drive type is SSD), pages are allocated until the capacity reaches the limit. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 78 The number of pages to be migrated at tier relocation is set to up to one page per second. Mode 904 = OFF: No restriction on the number of pages to be migrated at tier relocation (existing specification). Notes: System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 79 Mode 930 = ON: All of the zero data page reclamation operations in processing are stopped at once. (Also the zero data reclamation cannot be newly started.) Mode 930 = OFF: System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 80 8. Before downgrading the micro-program to an unsupported version, set system option mode 937 to OFF and wait for at least 30 minutes. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 81 Mode 1093 = ON: Background unmap cannot work. Mode 1093 = OFF (default): Background unmap can work. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 82 Mode 1097 = OFF (default): When SIM=452XXX, 462XXX, 3077XY, 4100XX, or 410100 is reported, the warning LED blinks. Note: The mode disables the warning LED to blink when specific SIMs are reported. System option modes Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 83: Maintaining The Storage System

    This chapter describes topics for performing storage system maintenance. Storing the storage system □ Using flash module drives □ Powering off the storage system □ Removing cables □ Maintaining the storage system Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 84: Storing The Storage System

    Follow the guidelines to avoid damaging the components when handling FMDs. • Check the main edge connector of the drive for any damage, deformation, dust or debris before installing. Maintaining the storage system Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 85: Powering Off The Storage System

    Observe the following instructions when removing cables form the storage system. To remove a SAS cable, pull the tab of the SAS cable (1) to release the latch and remove the SAS cable (2). Maintaining the storage system Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 86 LAN cable (2). To remove a PCIe cable, pull the tab of the PCIe cable (1) to release the latch and remove the PCIe cable (2). Maintaining the storage system Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 87: User Administration For Maintenance Utility

    User administration for maintenance utility The maintenance utility allows you to set up and manage user accounts. When NAS Modules are installed, see Hitachi NAS Platform System Access Guide. Required roles for operating Maintenance Utility □ Setting up user accounts □...

  • Page 88: Required Roles For Operating Maintenance Utility

    Boot System Safe Mode Support Personnel* Alert Display Support Personnel or User Maintenance* Alert Display Related to FRU Support Personnel or User Maintenance* Administration Menu Power Management System Management User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 89: Setting Up User Accounts

    In the Maintenance Utility window, click Administration > User Administration. In the User Groups tab, click Create User. Create a new user account. Specify the User Name, Account Status, Authentication and User Group. Click Finish. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 90 Authentication The following methods are available: Local = does not use authentication server. Uses a dedicated password for storage management software. External = uses an authentication server. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 91: Disabling User Accounts

    Procedure In the Maintenance Utility window, click Administration > User Administration. In the User Groups tab, click the user group to which the user belongs. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 92 Click the Users tab, and then select the user that you want to disable. Click Edit. For Account Status, click Disable, and then click Finish. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 93 Confirm the settings, and then click Apply. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 94 When a completion message appears, click Close. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 95: Removing User Accounts

    After deletion, click Edit to enable the user account. Procedure In the Maintenance Utility window, click Administration > User Administration. In the User Groups tab, click the user group to which the user belongs. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 96 Click the Users tab, and then select the user you want to remove. Click Remove. The Confirm window opens. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 97 In the Confirm window, confirm the settings and specify the task name, and then click Apply. At the completion message, click Close. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 98: Backing Up User Accounts

    Restoring user account information Procedure Click User Account Information > Restore The Restore User Account window opens. Specify file names to be restored, and then click Apply. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 99 When a completion message appears, click Close. User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 100 User administration for maintenance utility Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 101: Storage System Specifications

    Environmental specifications □ Battery specifications □ RAID specifications □ iSCSI specifications □ iSCSI standards □ Regulatory compliance □ Dense intermix drive tray connection restrictions □ SVP hardware specifications □ Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 102: Model Lists

    SFP-iSCSI optical) DW-F800-2HS10B Front end module (10-Gbps 2-16 SFP-iSCSI copper DW-F800-NAS NAS_Module DW-F800-1HP8 PCIe module DW-F800-PC1F PCIe cable (1.5 m) DW-F800-BS12G Back end module DKC-F810I-1PS8 SFP for 8-Gbps shortwave 0-64 Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 103: Drive Tray Model Lists

    Power cable (0.9 m) Power cable (2.5 m) Front bezel (2U) SFF drive tray optional components Model number Part name Quantity DKC-F810I-200MEM 200-GB, 2.5-inch, MLC, 12- 0-24 Gbps flash drive Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 104 1.8-TB, 3.5-inch, 10kmin , 6- 0-12 Gbps SAS drive DKC-F810I-4R0H3M 4-TB, 7.2K 3.5-inch, 7200min 0-12 6-Gbps SAS drive (contains BNST) DKC-F810I-4R0H3MC 4-TB, 7.2K 3.5-inch, 7200min 0-12 6-Gbps SAS drive Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 105 Dense intermix drive tray components Model number Part name Quantity DW-F800-DB60 and DW-F800- 4U box DB60C Power supply unit Power cable (0.9 m) Power cable (2.5 m) Front bezel (dense intermix drive tray) Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 106: Other Model List

    DW-F800-J2H10 10.0 m, 2-pole power cable with grounding terminal (AC 250 V, 13 A or 15 A) A-F6516-P620 Power cable for PDU (1) A-F6516-P630 Power cable for PDU (1) Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 107 5 m LC-LC optical cable for optical A-6515-JM10L 10 m LC-LC optical cable for optical A-6515-JM20L 20 m LC-LC optical cable for optical A-6515-JM30L 30 m LC-LC optical cable for optical Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 108: Replacement Parts

    Hitachi Virtual Storage Platform G800 mechanical specifications Controller 1 CBLH Drive tray 1 SFF drive tray 1 LFF drive tray 1 FMD drive tray 1 Dense intermix drive tray Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 109 5874.22 G bytes: 7,200 Maximum mountable quantity Mixing SFF, LFF, FMD, and dense intermix drive trays might affect the maximum number of drives that can be mounted. Dense intermix drive tray Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 110: Host Interface

    10 Gbps iSCSI (copper): 40 8 Gbps Fibre Channel Optical: Maximum number of ports (host port expansion chassis and NAS module installed) 16 Gbps Fibre Channel Optical: 10 Gbps iSCSI (optical): 16 Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 111 32 M bytes L3 Cache memory 4 M bytes SDRAM 1 G bytes Data bus Parity Cache memory ECC (1 bit for correction, 2 bits for detection) Drive Data assurance code Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 112 Approx 59.52 inches (27 kg) Approx. 83.77 pounds (38 kg) Dense intermix drive tray Approx. 198.41 pounds (90 kg) Required height Component Specification CBLH Dense intermix drive tray Cache specifications Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 113 3 hours every six months. Insulation performance Item Specification Insulation withstand voltage AC 1,500 V (100 mA, 1 min) Insulation resistance DC 500 V, 10 M Ω or more Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 114: Electrical Specifications

    This table shows the power requirement (100 V or 200 V) for the maximum configuration . The actual required power might exceed the value shown in the table when the tolerance is included. Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 115: Environmental Specifications

    (-10°C to 50°C) Transport, storage -22°F to 140°F -22°F to 122°F (-30°C to 50°C) (-30°C to 60°C) Temperature 10 or less change rate (°C/h) Humidity State Percentage Operating 8 to 80 Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 116 900 (Environmental temperature: 10°C to 35°C) when DKC-F710I-1R6FM or DKC-F710I-3R2FM drive is installed. (Environmental temperature: 10°C to 40°C) 3,000 3,000 (Environmental temperature: 10°C to 32°C) Operating (m) (Environmental temperature: 10°C to 32°C) Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 117: Acoustic Noise

    7.2 B to 8.1 B, according to the ambient temperature, drive configuration, and operating status. When accessing the dense intermix drive tray, do not work for long times at the rear of the rack. Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 118: Battery Specifications

    SAS, SAS 7.2 krpm, flash drives mounted: 0, 1, 5, 6, 1+0 (DBW supports SAS 7.2k drives) RAID configuration RAID 1 2D+2D, 4D+4D (unit of addition) RAID 5 3D+1P, 4D+1P, 6D+1P, 7D+1P Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 119: Iscsi Specifications

    255 (maximum per iSCSI port) With Linux software initiator, the maximum number decreases. Path failover HDLM Supports Microsoft MPIO (Multi Path I/O) Link 10 Gbps SFP+ Transfer speed 10 Gbps Connector type Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 120 Ping (ICMP ECHO) Transmit, Supported Receive IPsec TCP port number 3260 Changeable among 1 to 65,535. Observe the following if changing values: • The setting of the corresponding host should Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 121 JP1, HiCommand Dynamic Link Manager. Pass switching is achieved. Not supported on Microsoft Windows Vista and Windows 7 operating systems. IP Security. Authentication and encryption of IP packets. The storage system does not support IPsec. Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 122: Iscsi Standards

    FCC part 15 Subpart B: USA and Canada controls 2013 ICES-003 Issue 5:2012 ICES-003 USA and Canada AS/NZS CISPR Australia and New 22:2009+A1 Zealand TP TC 020/2011 Russia, Belarus, and Kazakhstan Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 123: Dense Intermix Drive Tray Connection Restrictions

    Do not operate the SVP server at temperatures of 40°C or higher. Item Specification Dimensions Height: 1.7 inches (43 mm) Width: 17.2 inches (437 mm) Depth: 14.5 inches (369 mm) Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 124 Canada - CUL listed • Germany - TUV Certified • Europe/CE Mark • EN 60950/IEC 60950-Compliant Fans 2x 4cm 4-pin PWM fans Operating system Microsoft Windows Embedded Standard 7 Storage system specifications Hitachi Virtual Storage Platform G800 Hardware Reference Guide...

  • Page 125: Index

    42 dense intermix drive tray restrictions 123 flash module drive tray 39 controllers host port expansion chassis 45 CBLH 24 large form factor drive tray 37 service processor 51 Index Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 126 LED 46 power supply unit 34 power supply units user administration 87 host port expansion chassis 49 powering off the storage system 85 RAID specifications 118 rear panels CBLH controller 26 Index Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 127 Hitachi Virtual Storage Platform G800 Hardware Reference Guide...
  • Page 128 Hitachi Data Systems Corporate Headquarters 2845 Lafayette Street Santa Clara, California 95050-2639 U.S.A. www.hds.com Regional Contact Information Americas +1 408 970 1000 info@hds.com Europe, Middle East, and Africa +44 (0) 1753 618000 info.emea@hds.com Asia Pacific +852 3189 7900 hds.marketing.apac@hds.com MK-94HM8026-04...

Table of Contents