Blocking The Controller - Hitachi G200 Service Manual

Blocking the controller

Procedure
1.
2.
3.
4.
5.
6.
7.
262
Start the maintenance utility.
Click Hardware > Controller Chassis.
In the Controller Chassis window, click the LANBs tab.
To display the most recent status of the LAN blade, click Refresh.
Confirm that the status of the LAN blade to be replaced is Warning.
Click the CTLs tab.
Click the Replace list and select the controller that contains the LAN
blade to be replaced.
Replacing a LAN blade
Service Guide for VSP Gx00 and VSP Fx00 Models