Maintenance Schedule - JLG t350 Service And Maintenance Manual

Item/Function
1
Wheel Lugs
Coupler Ball
Safety Chains
2 Check general operation and proper adjustment
Brakes
3
Brake Fluid
Breakaway
Suspension Check for worn components or broken springs
Welds
Floor, hinges, door and
dividers Inspect - repair or replace damaged, worn or broken
Tires
replace tire when treads are worn, when sidewall
Brakes, electric
Magnets
Controller (in tow vehicle) Check power output (amperage) and modulation
Roof vents, windows Clean dirt buildup, lubricate hinges and slides
Brakes - All types
Jack, drop leg
Frame members/ welds Inspect all frames members, bolts and rivets. repair
Wheels - Sealed bearings Check and confirm free running. Replace if not.
(hubs), Unsealed bear-
ings, Rims Disassemble/inspect/assemble and repack.
Inspect for cracks and dents. Replace as needed.
Axle attachment bolts
NOTE: 1 = Retighten when new and at the first 10, 25 and 50 miles
2 = Adjust after first 200 miles, 3000 mile intervals or as use requires.
3 = 1000 miles or 1 month when used in hot and dry environment.
3121198
Table 2-3. Maintenance Schedule
Method
Tighten to specified torque rating
Check for unusual wear
Check for unusual wear in links
Check reservoir
Check cable and all components
Check welds for cracks or separations
Wash both sides. Wash floor.
parts.
Rotate every 5000 miles
Inspect tread and sidewalls thoroughly
has a bulge, or sidewall is worn.
Check wear and current draw
Check for scoring and wearing
Grease gears at top
or replace damaged worn or broken parts
Inspect all welds. repair as needed
(sealed bearings are not serviceable)
replace promptly, if immersed in water.
Check by dealer
Every 3000 Miles
Break-In
or 3 Months
X
X
– JLG Lift –
SECTION 2 - GENERAL
INTERVAL
Every 6000 Miles
or 6 Months Miles or 1 year
X
X
X
X
X
X
X
X
X
X
X
X
Every 12,000
X
X
X
X
X
2-7