JLG t350 Service And Maintenance Manual page 137

4. Push the telescope cylinder into the rear of the
boom.
NOTE: The telescope cylinder weighs approximately 110
lbs. (50 kg).
5. Install the retaining rings and attach pins securing
the telescope cylinder to the boom fly section.
3121198
SECTION 4 - BOOM & PLATFORM
6. Apply Loctite #242 to the bolts and secure the tele-
scope cylinder to the boom base section. Torque the
bolts to 85 ft. lbs. (115 Nm)
7. Install the slave cylinder. Refer to Section 4.4, Slave
Cylinder.
8. Position the pivot onto the boom assembly.
NOTE: The pivot weighs approximately 19 lbs. (9 kg).
– JLG Lift – 4-5