Drive Enable Valve Identification - Drive & Set Option - JLG t350 Service And Maintenance Manual

SECTION 5 - HYDRAULICS
NOTE: All cartridges are torqued 18-20 ft.lbs. (24-27 Nm). The solenoid valve is to be
torqued 25-27 ft.lbs. (34-36.5 Nm). There is no torque specification for the filter.
1. Pressure Regulator (PR1)
2. Check Valve (CV1)
3. Relief Valve (RV1)
4. Relief Valve (RV2)
5. Solenoid Valve (SV1)
6. Filter (F1)
Figure 5-9. Drive Enable Valve Identification - Drive & Set Option
3121198 – JLG Lift – 5-17