Assembly - JLG t350 Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM
NOTE: The telescope cylinder weighs approximately 110
lbs. (50 kg).
8. Remove the wear pads from the front of the boom
base section.
9. Pull the fly section out of the base section.
NOTE: The boom fly section weighs approximately 125 lbs.
(57 kg.)
10. If necessary, remove the wear pads from the rear of
the fly section.
4-4

Assembly

1. If removed, install the wear pads and shims onto the
rear of the fly section. Apply loctite #242 to the bolts
and torque to 35 ft.lbs. (47 Nm).
2. Install the fly section into the base section.
NOTE: The boom fly section weighs approximately 125 lbs.
(57 kg.)
3. If removed, install the wear pads into the front of the
boom base section. Apply loctite #242 to the bolts
and torque to 35 ft.lbs. (47 Nm).
– JLG Lift – 3121198