Supplement; Technical Data - Vega VEGAPULS 64 Operating Instructions Manual

11 Supplement

11.1 Technical data

Note for approved instruments
The technical data in the respective safety instructions are valid for approved instruments (e.g. with
Ex approval). These data can differ from the data listed herein, for example regarding the process
conditions or the voltage supply.
Materials and weights
Materials, wetted parts
Plastic horn antenna
Ʋ Adapter flange
Ʋ Seal, adapter flange
Ʋ Focussing lense
Thread with integrated antenna
Ʋ Process fitting
Ʋ Antenna
Ʋ Seal, antenna system
Ʋ Process seal
Flange with encapsulated antenna system
Ʋ Flange
Ʋ Flange plating
Ʋ Antenna encapsulation
Hygienic fitting with encapsulated antenna system
Ʋ Process fitting
Ʋ Hygienic antenna encapsulation
Ʋ Surface roughness of the antenna
encapsulation
Ʋ Additional process seal with certain
hygienic fittings
Rinsing connection
Ʋ Flushing ring
Ʋ O-ring seal, rinsing connection
Ʋ Reflux valve
Ʋ Sealing, reflux valve
Materials, non-wetted parts
Mounting parts
Ʋ Antenna cone with plastic horn
antenna
Ʋ Compression flange
Ʋ Mounting strap
Ʋ Fixing screws, mounting strap
VEGAPULS 64 • HART and accumulator pack
PP-GF30 black
FKM (COG VI500), EPDM (COG AP310)
PP
316L
PEEK
FKM, FFKM
Klingersil C-4400
316L
PTFE
PTFE
316L
PTFE
R < 0.8 µm
a
FKM-FDA, EPDM-FDA, Kalrez 6230
PP-GFK
FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)
316 Ti
FKM (SHS FPM 70C3 GLT), EPDM (COG AP310)
PBT-GF 30
PP-GF30 black
316L
316L
11 Supplement
65