6 Set up with the display and adjustment module
Info
Backup on paper
Backup in the display and
adjustment module
50
In this menu item the following information of the instrument can be
read out:
•
Instrument name and serial number
•
Hardware and software version
•
Date of the factory calibration as well as the last change via adjust-
ment instruments
•
Sensor characteristics such as approval, process fitting, seal,
meas. range etc.
6.6
Saving the parameterisation data
We recommended writing down the adjustment data, e.g. in this op-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module,
the data in the sensor can be saved in the display and adjustment
module. The procedure is described in menu item "Copy device set-
tings" in the menu "Additional settings".
VEGAPULS 64 • HART and accumulator pack