Supplement; Technical Data - Vega VEGACAP 35 Operating Instructions Manual

9 Supplement

9 Supplement
9.1

Technical data

General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
Ʋ Process seal
Ʋ Insulation (partly insulated)
Ʋ Probe (cable PE/PA 12 partly insu-
lated: ø 6 mm/0.236 in)
Ʋ Gravity weight
Materials, non-wetted parts
Ʋ Housing
Ʋ Seal between housing and housing lid Silicone
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A)
Ʋ Pipe thread, conical (ASME B1.20.1)
Weight
Ʋ Instrument weight (depending on
process fitting)
Ʋ Gravity weight
Ʋ Cable weight: ø 6 mm (0.236 in)
Sensor length (L)
Active tip (gravity weight)
Max. tensile load (cable)
Ʋ PE/PA 12 partly insulated: ø 6 mm
(0.236 in)
Max. torque (process fitting - thread)
Torque for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium housing
Measuring frequency
Output variable
Output
Switching voltage
Ʋ Min.
28
Steel St 37, 316Ti or Aluminium
Klingersil C-4400
PE/PA 12
316L
316L
Plastic PBT (polyester), Alu die-casting powder-coated
316L
PA, stainless steel, brass
NBR
PA
G1½
1½ NPT
0.8 ... 4 kg (0.18 ... 8.82 lbs)
approx. 900 g (32 oz)
approx. 180 g/m (1.9 oz/ft)
400 ... 20000 mm (15.75 ... 787.4 in)
200 mm (7.874 in)
10 KN (2248 lbs)
100 Nm (74 lbf ft)
max. 10 Nm (7.376 lbf ft)
max. 50 Nm (36.88 lbf ft)
430 kHz
Relay output (DPDT), 2 floating change-over contacts
10 mV
VEGACAP 35 • Relay (DPDT)