Setup With Pactware; Connect The Pc; Parameter Adjustment - Vega VEGAPULS 64 Operating Instructions Manual

Via the interface adapter
directly on the sensor
Prerequisites
VEGAPULS 64 • HART and accumulator pack
7

Setup with PACTware

7.1

Connect the PC

Fig. 35: Connection of the PC directly to the sensor via the interface adapter
1 USB cable to the PC
2 Interface adapter VEGACONNECT
3 Sensor
7.2

Parameter adjustment

For parameter adjustment of the instrument via a Windows PC, the
configuration software PACTware and a suitable instrument driver
(DTM) according to FDT standard are required. The latest PACTware
version as well as all available DTMs are compiled in a DTM Collec-
tion. The DTMs can also be integrated into other frame applications
according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functions are included in older firmware versions. You can download
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
Further setup steps are described in the operating instructions manu-
al "DTM Collection/PACTware" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descrip-
tions are available in the online help of PACTware and the DTMs.
2
7 Setup with PACTware
1
3
51