Siemens HHB-710 User Manual page 9

8 Headset PTT Bluetooth
2. Activate search mode on your
mobile phone. Please read the
notes in your mobile phone
manual.
3. If your mobile phone finds
your headset, this is shown on
the mobile telephone display
beneath the device name
HHB-700.
If your mobile phone does not find the
headset within 3 minutes, activate
search mode again (repeat step 1).
4. If requested, enter the
password (PIN) for the
headset into your mobile
phone:
0000.
The Bluetooth Headset is now
registered to your mobile phone.
Making a phone call
You can only make calls with
the headset if the headset is
switched on (see on left) and if
the headset is registered with a
mobile phone (p. 7).
The procedure described below
only applies to Siemens mobile
phones. It may be different for
other manufacturers' mobiles.
® (en)
The following symbols are used
to explain how to operate the
headset:
b
• You will know the call is about to
drop if the signal quality is poor.
• If the mobile phone is not
connected to the network, you will
hear a recurring beep tone in the
headset.
• If the Bluetooth connection to the
mobile phone is interrupted for
several seconds during a call, you
can only continue the call with the
mobile phone.
Voice dialling
You can dial a number by saying
the name aloud. A voice
recording of the name must be
stored with the number in the
Addressbook in the mobile
phone. Please read the manual
for your mobile phone.
This function is not offered by all
mobile phones.
1. Briefly press the ptt key.
This function varies from
service provider to service
provider. You may need to
register separately for this
service.