Configuring Multiple Subscriber Numbers (Msns) - IBM International ISDN User Manual

10.2 Configuring Multiple Subscriber
Numbers (MSNs)
10.2.1 Windows 95, Windows 98, Windows Millennium
Edition
The following section describes how to add or change the
configuration of Multiple Subscriber Numbers in the NDIS
WAN CAPI driver. Although MSNs can be configured in the
driver, it is strongly recommended that you enter MSN set-
tings only in applications that require them. You must have
the NDIS CAPI WAN drivers installed in order to perform the
following steps. Note that MSNs are a feature of the Euro-
ISDN (DSS1) switch protocol only!
If you are using Windows 95, it is assumed that you have in-
stalled the Microsoft Dial-Up Networking 1.3 update on your
computer. If not, please refer to the Windows 95 driver in-
stallation section of this User guide.
1. Click "Start / Programs / Accessories /Communica-
tions" and start the "ISDN Configuration Wizard" .
2. In the first ISDN Configuration Wizard dialog, click
"Next". In the next section, leave the "Switch protocol"
set to "Automatic" by clicking "Next" again. In the next
dialog, enter an MSN in either or both of the "Phone
number" fields. When you have done so, click "Next".
ISDN PC Card – 10 Configuration and Diagnostics of the IBM International ISDN PC Card

Configuring Multiple Subscriber Numbers (MSNs)

71