Table of Contents
Advertisement
Removing any PCMCIA Support Software
Even if the PCMCIA sockets are not highlighted with the ex-
clamation mark, you must remove them, and follow the in-
structions in this chapter.
Make sure that you have removed both sockets !
Some Windows 95 versions may show only one PCMCIA
socket instead of two.
Once you have removed the PCMCIA sockets, restart your
computer.
When Windows 95 restarts, the operating system reinstalls
the drivers for the PCMCIA sockets. After system start-up has
been completed, return to the "System" applet in the Control
Panel and check in the Device Manager to make sure that the
PCMCIA sockets are now installed properly. If so, close the
Device Manager by clicking the "OK" button.
ISDN PC Card – 4 Installing the Device Drivers in Windows® 95
17
Advertisement
Table of Contents
