Table of Contents
Advertisement
Installing the Device Drivers in Windows® Millennium Edition
6 Installing the Device Drivers
in Windows® Millennium
Edition
6.1 Outline of the Installation Process for
Windows Millennium Edition
The device drivers for the IBM International ISDN PC Card are
installed in two steps
1.
Install the CAPI 2.0-compliant device drivers
2.
Install the NDIS WAN CAPI drivers
6.2 Installing the IBM International ISDN
PC Card in Windows Millennium
Edition
To install the IBM International ISDN PC Card in Windows Mil-
lennium Edition, proceed as follows:
1.
Turn off the PC, choose a PCMCIA slot and insert the
IBM International ISDN PC Card into this slot without
the ISDN cable attached.
2.
Turn the PC back on. The "New Hardware Wizard" ap-
pears and reports that it has detected an "ISDN-CARD".
3.
Now insert the CD labeled "IBM International ISDN PC
Card Installation Software" into your computer's CD-
ROM drive.
4.
Since Windows Millennium Edition cannot find the
proper driver for the adapter automatically, select the
option "Specify the location of the driver (Advanced)"
in the "Add New Hardware Wizard" window. Then click
"Next".
ISDN PC Card – 6 Installing the Device Drivers in Windows® Millennium Edition
:
35
Advertisement
Table of Contents
