Table of Contents
Advertisement
Whether you use cFos or the NDIS WAN CAPI drivers in
Dial-Up Networking depends on the Internet access
software you want to use.
Note that you can add only one additional device to the
dial-up connection. Adding more than one device on
the "Multilink" page may cause the connection to fail!
Note too that you cannot form a multilink connection
using the same device twice. Doing so will not increase
the transfer speed, and may cause the connection to
fail!
6.
In the "Phone Numbers" dialog, enter the phone num-
ber to be dialed on the second B channel, then click
"Add". When the correct number appears in the list,
.
click "OK"
7.
Now click "OK" twice to close the remaining configura-
tion dialogs.
You are ready to dial up a multilink connection to your Inter-
net account using two ISDN B channels.
ISDN PC Card – 11 Implementations of the IBM International ISDN PC Card
Internet Access in Windows NT 4.0 Workstation
117
Advertisement
Table of Contents
