2145 Ups-1U Controls And Indicators; San Volume Controller 2145-Cf8 Port Not Used; Physical Fibre-Channel Port Numbers For The San Volume Controller 2145-Cf8; Ups-1U Front-Panel Assembly - IBM 2145-CF8 Hardware Installation Manual

Figure 46. SAN Volume Controller 2145-CF8 port not used
When present, this port is disabled in software to make the port inactive. The SAS
port is present when the optional high-speed SAS adapter is installed with one or
more solid-state drives (SSDs).
SAN Volume Controller 2145-CF8 fibre-channel port numbers and
worldwide port names
The physical port numbers are 1 - 4, counting from the left side to the right side
when you view the rear panel of the SAN Volume Controller 2145-CF8.
Figure 47 provides a view of the rear of the SAN Volume Controller 2145-CF8.
Figure 47. Physical fibre-channel port numbers for the SAN Volume Controller 2145-CF8

2145 UPS-1U controls and indicators

All controls and indicators for the 2145 UPS-1U are located on the front-panel
assembly.
Figure 48. 2145 UPS-1U front-panel assembly
1 Serial-attached SCSI (SAS) port
1 2 3 4
LOAD 2 LOAD 1
1 2
1 Load segment 2 indicator
2 Load segment 1 indicator
3 Alarm or service indicator
4 On-battery indicator
5 Overload indicator
6 Power-on indicator
Appendix C. SAN Volume Controller hardware controls, indicators, and connectors
1
+ -
3 4 5 6
7
8
55