Table of Contents
Advertisement
10.1 Changing the Switch Type
10.1.1
Changing the Switch Type in Windows 95,
Windows 98, Windows Millennium Edition,
Windows NT 4.0 Workstation
Windows NT 4.0 Workstation Users:
The following section assumes that you are logged on to a
Windows NT 4.0 Workstation system as Administrator. If you
are not logged on as Administrator, you may not be able to
perform all the steps outlined in this chapter.
1.
Click "Start / Programs / IBM ISDN PC Card" and then
"IBM ISDN PC Card Setup" to start the configuration
tool.
Windows NT 4.0 Workstation: The first dialog allows you
to change the system resources used by the adapter (in-
terrupt and I/O address). Change the resources or sim-
ply click "Continue". The next dialog allows you to sel-
ect the switch type.
2.
Select the desired switch type and then click
"Continue". The next window informs you about the
new adapter configuration.
ISDN PC Card – 10 Configuration and Diagnostics of the IBM International ISDN PC Card
Changing the Switch Type
65
Advertisement
Table of Contents
