IBM International ISDN User Manual page 188

Notes on RAS Server Configuration in Windows NT Server 4.0
The RAS server is installed on an Windows NT server
equipped with an ISDN adapter. If necessary, the PDC and
RAS can be configured on the same machine. The RAS port
ISDN1 or ISDN2 is installed as described in Section 13.2.1,
and configured to accept incoming calls in Remote Access
Setup.
RAS Client with Windows 95 (Remote)
The ISDN CAPI Port Driver for Windows 95 can be installed
along with Dial-Up Networking according to the instructions
in the on-line Help. Enter the following settings in the Control
Panel:
Network/Identification:
•
Workgroup = domain name.
Network/Configuration:
•
Client for Microsoft Networks
•
Properties: Log on to Windows NT domain; enter the
name of the NT domain.
•
Network log-on options: Quick log-on
•
Dial-Up Networking adapter
•
Network protocol TCP/IP or NetBEUI bound to the Dial-
Up Adapter (see further details in Sections 13.2.2.2 and
13.2.2.3).
Use the "ISDN RAS" or "ISDN Internet" modem entry for the
Dial-Up Networking connection, and select the server type
"PPP: Windows 95, Windows NT 3.5, Internet".
188 ISDN PC Card – 13 Using NDIS