Ibm Dials Client - IBM International ISDN User Manual

IBM DIALs Client

11.6 IBM DIALs Client
This section explains the basic use of the IBM DIALs Client in
Windows 95 and Windows 98. The client software should
work with the following IBM products:
•
8235 DIALs Server
•
2210 Nways Multiprotocol Router and Multiprotocol
Routing Services (MRS)
•
2212 Access Utility (AIS)
•
2216 Nways Multiaccess Connector
Support for the use of the IBM DIALs client is available at the
following web site:
http://www.networking.ibm.com/support
This section only describes the use of the Dial-In client.
The latest DIALs Client can be obtained from the download
section of the 2210 support page located at http://www.net-
working.ibm.com/support/code.nsf/2210dial?OpenView.
This client works with the 8235, 2210, 2212, and 2216.
1. After installing the IBM DIALs client on your notebook,
double-click the "My Computer" icon. The "Dial-In Net-
working" icon which now appears represents the DIALs
client. Double-click this icon.
2. In the "Dial-In Networking" window, double-click the
"Make New Connection" icon.
3. The "New Connection Wizard" starts. Enter a name for
the connection in the "New connection name" field. In
the "Select Modem/Device" dialog, select "AVM-GmbH
(CAPI ISDN Device)" in the drop-down list. Enter any
phone number and select the country code if neces-
sary. Click "Next". In the last dialog, click "Finish".
154 ISDN PC Card – 11 Implementations of the IBM International ISDN PC Card