Table of Contents
Advertisement
Running the Diagnostics in Windows 95/98/Millennium Edition und Windows NT 4.0
10.3 Running the Diagnostics in Windows
95/98/Millennium Edition und
Windows NT 4.0 Workstation
Windows NT 4.0 Workstation Users:
The following section assumes that you are logged on to a
Windows NT 4.0 Workstation system as Administrator. If you
are not logged on as Administrator, you may not be able to
perform all the steps outlined in this chapter.
There is no diagnostics tool available for Windows 2000
Professional or Windows XP!
1.
Click "Start / Programs / ISDN PC Card", then click "IS-
DN PC Card Test". If you are using Windows 95, Win-
dows 98, or Windows Millennium Edition, a message
informs you that CAPI will no longer be available after
testing until you restart your computer. This is not the
case in Windows NT 4.0, since services can automati-
cally be restarted without restarting the system.
2.
Click "Yes" perform the diagnostic tests.
3.
The diagnostics program then reports that the tests
were completed. Click "OK" again.
4.
Click "Exit" to close the diagnostics program.
78
ISDN PC Card – 10 Configuration and Diagnostics of the IBM International ISDN PC Card
Advertisement
Table of Contents
