Table of Contents
Advertisement
Removing the IBM ISDN PC Card from Windows NT 4.0 Workstation
11. Remove the IBM International ISDN PC Card from the
PCMCIA slot.
This completes the removal of the adapter.
12.2 Removing the IBM ISDN PC Card from
Windows NT 4.0 Workstation
The following section assumes that you are logged on to a
Windows NT 4.0 Workstation system as Administrator. If you
are not logged on as Administrator, you may not be able to
perform all the steps outlined in this chapter.
1.
Leave the IBM International ISDN PC Card in the PCMCIA
slot. Disconnect the card's ISDN cable from the ISDN
line.
2.
Click"Start / Settings / Control Panel" to open the Con-
trol Panel. Double-click the "Network" icon. Click the
"Adapters" tab and then "NDIS WAN CAPI Driver".
3.
Click the "Remove" button and confirm that you want to
remove this device.
164 12 Removing the IBM International ISDN PC Card
Advertisement
Table of Contents
