Checking And Installing Remote Access Service - IBM International ISDN User Manual

7.5 Checking and Installing Remote
Access Service
7.5.1 Checking Whether Remote Access Service Is
Installed
In order to install the NDIS WAN CAPI drivers, you must have
Remote Access Service installed. In order to check whether
Remote Access Service (RAS) is installed on your notebook
computer, proceed as follows:
1. Double-click the "My Computer" icon on the Windows
NT 4.0 Workstation desktop, then double-click "Dial-Up
Networking".
2. If the phone book appears, then RAS is properly in-
stalled on your computer and you can continue with the
section "Installing the NDIS WAN CAPI Drivers". If the
phone book does not appear, perform the following
steps to install RAS on your computer.
ISDN PC Card – 7 Installing the Device Drivers in Windows® NT® 4.0 Workstation

Checking and Installing Remote Access Service

49