IBM International ISDN User Manual page 190

Problem Solving
Bindings / Client for Microsoft Networks
WINS Configuration: Use DHCP for WINS Resolution
•
Dial-Up Networking: Server Type / Allowed Network Pro-
tocols: TCP/IP; Server-assigned IP address"
13.2.2.1 Notes on Using the Network Protocol NetBEUI
NetBEUI is a broadcast-oriented network protocol which is
not routable. This means that its use in LANs and WANs is
limited, but it is easy to configure in Microsoft networks.
Windows NT Server (Central Site)
The following configuration installs NetBEUI for RAS clients:
•
"Network / Services / Remote Access Service / Proper-
ties... / Port ISDN1 / Network / NetBEUI"
RAS Client with Windows 95 (Remote)
•
Network Setup: bind NetBEUI protocol (from Microsoft)
to the Dial-Up Adapter
•
Dial-Up Networking: "Server type / Allowed network
protocols: NetBEUI"
13.2.3 Problem Solving
This section describes the remedies for a few errors which
could occur while operating the NDIS WAN CAPI Driver for
Windows NT.
•
Symptom: CAPI applications which accept incoming da-
ta calls (with the ISDN service indicator DATA64K) do
not work alongside the NDIS WAN CAPI Driver for Win-
dows NT and the RAS Server mode.
Cause: Both the NDIS WAN CAPI Driver for Windows NT
and the other CAPI applications are attempting to an-
swer the same incoming calls.
190 ISDN PC Card – 13 Using NDIS