System Status Icons; Ac Power On; Ac Power Off; Phone Line Failure - 2gig Technologies GC2 User Manual

SYSTEM STATUS ICONS

The top line of the Control Panel's display is
the status bar that shows the current system
mode, the status of the sensors, and any
current system trouble alerts. Special icons
are displayed on the right side to provide
visual indications of the system's current
condition.

AC POWER ON

The AC Power icon shows the
status of the AC power to the
Control Panel. A WHITE plug
appears when AC power is
present.

AC POWER OFF

The AC Power icon shows the
status of the AC power to the
Control Panel. A RED "X" appears
over the WHITE plug when AC
power is absent.

PHONE LINE FAILURE

If the Control Panel detects that
the telephone line is
disconnected, the phone line
failure icon appears.

SOUNDER DISABLED

If the system's internal sounder
has been lowered and external
sounder has been disabled by the
installer for testing, the sounder
26 Copyright © 2016 Nortek Security & Control
disabled icon appears. It also flashes to
indicate silent arming.
LOW BACKUP
BATTERY
If the Control Panel's backup
battery tests low, the low backup
battery icon appears.

TEST MODE

This icon displays when the
system is in Walk Test mode.
TOUCH SCREEN
KEYPAD TRAFFIC
An up arrow indicates the panel is
sending information to the touch
screen keypad (if installed). A
down arrow indicates the touch
screen keypad is sending
information to panel.

CELL RADIO

If the option GSM (Cellular) Radio
Module is installed, the Cell Radio
icon appears while the Control
Panel is receiving Over‐the‐Air
(OTA) firmware updates.
INTERIOR SENSOR
OPEN
If an interior sensor is open (or a
motion detector has just been
activated) this icon appears. As a
warning, the icon flashes during
arming.