System Status Icons; Ac Power Icon; Phone Line Failure Icon; Backup Battery Status Icon - 2gig Technologies Go!Control 2GIG-CNTRL2 User Manual

The top line of the Control Panel's display is the status area that shows the current system mode, the
status of the sensors, and any current trouble alerts. Special icons are displayed to visually show the
system's current condition.

AC Power Icon

The AC power icon displays whether the
Control Panel is receiving AC line power or not.

Phone Line Failure Icon

If the system detects a telephone line failure,
the phone line failure icon will be displayed.

Backup Battery Status Icon

If the Control Panel's backup battery tests low
or exhausted, the low backup battery icon will
be displayed.

Test Mode Icon

When the system is placed in System Test
Mode, the test mode icon will fl ash in the
status bar of the display during the testing.

Remote Installer Access Icon

When the system is being remotely accessed
by your installer with a computer over the
telephone, the remote access icon will be
displayed.

Radio Modem Icon

If the system's optional GSM radio modem is
installed, the GSM radio icon will be displayed
on the status bar while the GSM radio is being
used to update software or add features.

Interior Sensor Open Icon

If an interior sensor is open (or a motion
detector has just been activated) the house
icon will be displayed on the status bar. As a
warning, the icon fl ashes during arming.

System Status Icons

Status Icon Area
Phone Line Failure Icon
Low Backup Battery Icon
Remote Installer Access Icon
Interior Sensor Open Icon
System Status Icons
AC
POWER
ON
AC Power Icons
PHONE
LINE
FAILURE
LOW
BACKUP
BATTERY
SYSTEM
IN TEST
MODE
Test Mode Icon
REMOTE
ACCESS
OCCURRING
RADIO
MODEM
ACTIVE
Radio Modem Icon
INTERIOR
SENSOR
OPEN
AC
POWER
OFF
23