GC2 Wireless Security System | User Guide
READING CONFIDENTIAL
MESSAGES
NOTE: When a confidential message is
sent to the Control Panel, only the
Master User with the master user
code can read the message.
When a confidential message appears, the
Master User should do the following:
Tap the message line on the message list.
1
If the message is a confidential message,
the Code Entry screen appears.
Enter the master user code. Other user
2
codes are not accepted.
View the displayed message.
3
As detailed in "Reading Messages" on
4
page 27, either save or delete.
FILTERING MESSAGES
To select the type of messages that are
displayed on the message list, use the
Message Filter screen.
To display the Message Filter screen, tap
1
Filters.
28 Copyright © 2016 Nortek Security & Control
Check or clear the boxes of the types of
2
messages to display. To check all types of
messages, tap All. To return to the
message list, tap Back.
The filters will reset when the following
occurs:
•
You select All Types
•
Your message reviewing is over
•
The system displays the Security screen
SORTING MESSAGES
To select the order in which messages are
displayed on the message list, use the
Message Sort screen.
To display the Message Sort screen, tap
1
Sorts.
To sort the messages, pick from the
2
following options:
•
Date received
•
Date expired
•
Alphabetically
To reverse the display order, check the
3
Reverse box.
To list urgent messages first, check the
4
Priority box.
To return to the message list, tap Back.
5
When the message reviewing session is
6
over, the sort options will reset.