Disarming From Away Mode; If A Burglary Alarm Occurs; Burglary Alarm Siren; Alarm Memory - 2gig Technologies GC2 User Manual

Table of Contents

Advertisement

GC2 Wireless Security System | User Guide

Disarming from Away Mode

The system should be disarmed from Away 
mode while entering the premises.
Enter the premises through a designated 
1
Entry Delay sensor‐protected door.
The Disarm Code screen displays on the 
2
Control Panel and the Entry Delay beeps 
sound. The left side of the screen shows 
events that have occurred while the 
system was armed.
Enter a valid user code to disarm the 
3
system.
In case you tap the wrong key, the 
 button erases the entire entry.
IF A BURGLARY ALARM
OCCURS
If an armed sensor is tripped while the 
system is armed in the Stay or Away mode, 
an alarm occurs and the siren sounds. 
Delayed sensors start the Entry Delay to 
allow time to disarm the system. Instant 
sensors trigger the alarm right away. Most 
sensors trigger the alarm siren, some 
sensors may be set to trigger a silent alarm 
without sounding the siren.

Burglary Alarm Siren

If a burglary alarm is tripped while the 
system is armed, the Control Panel sounds 
the alarm siren for a preset time (see 
"Installer Programmed Options" on page 40). 
After the time expires, the siren will stop 
sounding.
The system limits the number of times a 
sensor can re‐trigger an alarm while the 
system is armed. The setting is one to six 
18 Copyright © 2016 Nortek Security & Control
times per sensor, per arming period (see 
"Installer Programmed Options" on page 40).

Alarm Memory

If an alarm has occurred while the system 
was armed, the Disarm screen shows the 
time and date of the alarm and the sensor(s) 
that triggered the alarm.
After the system is disarmed, the Alarm 
Memory screen appears. The Alarm 
Memory screen shows the sensor(s) that 
caused the alarm. If more than one sensor 
was triggered, the display shows the order in 
which the alarms occurred.
The alarm memory automatically clears the 
next time the system is armed. You can also 
check the Clear Alarm History box and tap 
Ok to manually clear the alarm memory (24‐
hour fire and CO sensors that are still 
violated remain in alarm memory).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents