Table of Contents
Advertisement
Use the ↑ and ↓ arrows to set the
6
current date or time. Tap Ok.
A confirmation screen showing the date
7
and time set appears. Tap Ok.
DISPLAY FIRMWARE VERSION
To troubleshoot your system, you can check
the firmware version that has been installed.
To display the firmware version:
At the Home screen, tap Security.
1
At the Security screen, tap Menu.
2
At the Menu screen, tap Toolbox.
3
At the Toolbox (1 of 3) screen, tap the →
4
arrow.
At the Toolbox (2 of 3) screen, tap
5
Version.
When finished, tap Back.
6
DEALER INFO SCREEN AND
CALL BACK BUTTON
Your 2GIG Alarm Dealer may configure the
Enter Your Code screen to display contact
information for your 2GIG Alarm Dealer or
the Central Station.
Accessing the Dealer Info
Screen
To access the Dealer Info screen:
At the Home screen, tap the system
1
logo.
At the Enter Your Code screen, enter the
2
four (4)‐digit master user code.
The left side of the Enter Your Code
3
screen reveals contact information for
your 2GIG Alarm Dealer or the Central
Station.
Requesting a Service Call
Back
To request a service call back:
At the Enter Your Code screen, a call
1
back button appears at the bottom or
the screen.
Tap the call back button to transmit a
2
report to your alarm dealer or the
Central Station.
When the report is received by the 2GIG
Alarm Dealer or Central Station, you will
receive a call back in accordance with the
terms of your dealer's service agreement.
For additional information about call backs,
consult your 2GIG Alarm Dealer.
Copyright © 2016 Nortek Security & Control 39
System Toolbox
Hide quick links:
Advertisement
Table of Contents
