Power On/ Off - GBC F-60H Operation & Maintenance Manual

Operations

5.1 Power On/ Off

Power on
a) Ensure the laminator is plugged in and that all E-
STOPs are in the unlatched position.
b) Turn the MAIN POWER to the up position.
P O
W
E R
c) Press RESET located above the main power
on/off.
P O
W
E R
Page 5 - 2
On
Off
Reset
F 60 H Operation and Maintenance Manual
d) Power indicator on the control panel should be
illuminated at this time.
4 7
2 9
Power indicator light
Power off
a) Ensure the rollers are in the up position.
b) Turn the MAIN POWER to the down position.
P O
W
E R
© April 2001 General Binding Corporation
00
On
Off