GBC F-60H Operation & Maintenance Manual page 25

F 60 H Operation and Maintenance Manual
Electrical Shock: Live voltage present. Exercise
extreme caution. You may be electrocuted!
Lift Here: This point may be used as a lifting point. If
ignored, damage will occur to the laminator.
Reset: Machine reset. Press after initiating power to the
laminator or after an E-STOP or E-CABLE has been
engaged then reset.
© April 2001 General Binding Corporation
Refer to Figure 1.9.1 Label Placement illustrates
the location of each of these labels.
Safety
Page 1 - 13