Chain Tensioning - GBC F-60H Operation & Maintenance Manual

F 60 H Operation and Maintenance Manual

8.5 Chain tensioning

A properly tensioned chain should have a 1/2 in
( 1.3 cm ) of total play at the longest stretch of the chain.
Read and understand the precautions below before
attempting any service work.
D o not w ear ties, loose fit clothing or
dangling jew elry w hile operating or
servicing the lam inator. T hese item s can get
caught in the nip and choke you or you can
be crushed or burned.
R em ove A L L pow er to the lam inator before
rem oving any cabinet covers.
Y ou m ay be shocked or electrocuted!
A lw ays practice lock out/ tag out procedures
w hen perform ing any type of service or
m aintenance w ork on the m achine.
© April 2001 General Binding Corporation
W AR N IN G
W AR N IN G
W AR N IN G
Tools required
• 1/8 inch allen wrench
• 7/16 inch wrench or socket
a) Ensure all power to the laminator has been
removed.
b) Use proper lock out/ tag out procedure.
c) With a 1/8 in. allen wrench, remove the drive
side cabinet cover by;
1) Loosen the three screws along the
bottom.
2) Remove the seven screws along the
top and sides of the cover.
2
1
Maintenance
Page 8 - 5