Operations - GBC F-60H Operation & Maintenance Manual

F 60 H Operation and Maintenance Manual

5.0 Operations

In this section you will find information on how to
properly turn your Falcon 60 H Laminator on, learn
functions of the control panel, increase and decrease
temperature, properly load and unload film, use of the
unwind brake tensioning system, rewind brake tensioning,
how to manually set the nip for mounting, and foot switch
function.
The following general rules should always be
adhered while operating this machine.
D o not w ear ties, loose fit clothing or
dangling jew elry w hile operating or
servicing the lam inator. T hese item s can get
caught in the nip and choke you or you can
be crushed or burned.
IN F O R M AT IO N
T he m achine w ill only operate if all
four em ergency stops are unlatched and
R E SE T has been pressed.
It is unsafe to sheet feed w ithout the
pressure plate properly placed on
the front feed table.
© April 2001 General Binding Corporation
W AR N IN G
W AR N IN G
W AR N IN G
W hen the lam inator rollers are in
m otion, keep hands and fingers
aw ay from the nip of the rollers.
Y ou m ay be C R U SH E D or B U R N E D !
W AR N IN G
K eep hands and fingers clear of the
lam inator roller nip w hen changing G A P.
Y ou can be C R U SH E D or B U R N E D !
W AR N IN G
W hen operating the lam inator using the
footsw itch, keep hands and fingers aw ay
from the nip of the rollers.
Y ou m ay be C R U SH E D or B U R N E D !
W AR N IN G
D o not operate the lam inator, except
during w eb set up, w ithout the front
and rear feed tables in position.
Operations
Page 5 - 1