GBC F-60H Operation & Maintenance Manual page 110

Maintenance
d) Check the primary chain ( outer ) and the
secondary chain ( inner ) for proper chain
tension.
e) If the chains require tensioning, loosen the four
motor mount bolts with a 7/16 in. wrench.
F o u r b o lts
IN F O R M AT IO N
T he m otor controls the tension of the both
chains. If one is chain is still too loose,
a half link m ay be rem oved.
Page 8 - 6
F 60 H Operation and Maintenance Manual
f) Press firmly down on the motor housing and
tighten the motor mount bolts.
g) Check the primary chain ( outer ) and the
secondary chain ( inner ) again for proper chain
tension.
h) Replace the drive side cabinet cover and restore
power to the machine.
© April 2001 General Binding Corporation
P re s s
firm ly
h e re