GBC F-60H Operation & Maintenance Manual page 72

Applications
Top material : Roll of pressure sensitive mount adhesive
Bottom material : N/A
Other material (s) : Substrates, leader board and trailer board
Motor Direction
Motor Speed
3
2
1
Roller Pressure
Notes : The roll of mount adhesive should not exceed the substrate by more than 1 in.
(2.5 cm). Speed will be determined by what is comfortable with the operator. Pressure
is dependent on the substrate. Do not crush the substrate. Use a leader board to start
the run and stop the run when the trailer board is in the nip of the rollers. Stopping on
a subtsrate will leave an impression on the board. Refer to helpful hints for pressure
sensitive materials and mounting.
Page 6 - 10
PROCESS CONTROL CHART
Materials - Pre-coating substrates
5 6
4 7
8
9
10
RANGE
F 60 H Operation and Maintenance Manual
Heater
Upper Roller Temperature
CAL 3200
RANGE
CAL 3200
© April 2001 General Binding Corporation