[Counter 3]
Always shows "0" on your printer.
[Counter 4]
Displays the total number of color and monochrome prints ([Counter 1]+[Counter 2]).
6.7
[General]
You can configure the general settings for the machine, such as date, time, or sound.
"[Date & Time]" (P.56)
"[Sounds]" (P.56)
"[NFC]" (P.56)
"[Status LED (Green)]" (P.56)
"[Power Saver]" (P.56)
"[Timers]" (P.57)
"[Units]" (P.57)
"[Default Paper Size]" (P.57)
[Date & Time]
Set the date, time, and time zone.
[Sounds]
Specify whether to use notification sounds.
[NFC]
Specify whether to allow a mobile device such as a tablet or a smartphone to connect to the machine
via NFC communication.
[Status LED (Green)]
Specify whether to enable the blinking feature of the Status LED on the operator panel.
For details on status LEDs, refer to "Operator Panel" (P.11).
[Power Saver]
Set the amount of time until the machine enters the power saver mode.
For details on power saving features, refer to "Power Saver Mode" (P.29).
56
6 Changing the Machine Settings