Setting The Date And Time - Konica Minolta CM-700d Instruction Manual

3
Press the [SAVE/SEL] button.
The <Calibration> screen is displayed in the selected
language.
* The figure shows an example when German (Deutsch) is
selected.

Setting the Date and Time

The CM-700d/600d has a built-in clock to record the date and time of measurement. Since the date and
time have been set at the factory, you do not need to change them under normal conditions. If necessary,
you can change the date and time settings.
[Setting Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the button of the cross key to move the
cursor to "Settings" and then press the
[SAVE/SEL] button.
The <Settings> screen is displayed.
3
Use the button of the cross key to move the
cursor to "Date&Time" and then press the
[SAVE/SEL] button.
The <Date&Time> screen is displayed.
Other Settings
E-67