System Alarms (Traps); Security Alarms; Wireless Interface Card Alarms; Operational Alarms - Proxim ORiNOCO AP-2500 User Manual

Troubleshooting
6. Change the IP Address and other network values using set and reboot CLI commands, similar to the example
dialog below (use your own IP Address and IP Mask). Result: After each entry the CLI reminds you to reboot;
however wait to reboot until all commands have been entered.
[Device name]> set ipaddrtype static
[Device name]> set ipaddr <IP Address>
[Device name]> set ipsubmask <IP Mask>
[Device name]> set ipgw <Default Gateway IP Address>
[Device name]> reboot 0
7. After the AP-2500 reboots, verify the new IP Address by reconnecting, and then entering a show ip CLI statement
(as in Step 5). Alternatively, you can use the "ping" network command from networked computers to test the new IP
Address.
8. When the proper IP Address is set, use CLI or the HTTP Interface over the LAN to complete configuration and
manage operations.

System Alarms (Traps)

Security Alarms

oriTrapAuthenticationFailure
oriTrapUnauthorizedManagerDetected

Wireless Interface Card Alarms

oriTrapWLCNotPresent
oriTrapWLCFailure
riTrapWLCRemoval
oriTrapWLCIncompatibleFirmware
oriTrapWLCVoltageDiscrepancy
oriTrapWLCIncompatibleVendor
oriTrapWLCFirmwareDownloadFailure

Operational Alarms

oriTrapWatchDogTimerExpired
oriTrapRADIUSServerNotResponding
oriTrapModuleNotInitialized
oriTrapDeviceRebooting
oriTrapTaskSuspended
oriTrapBootPFailed
oriTrapDHCPFailed

FLASH Memory Alarms

oriTrapFlashMemoryEmpty
oriTrapFlashMemoryCorrupted

TFTP Alarms

oriTrapTFTPFailedOperation
oriTrapTFTPOperationInitiated
oriTrapTFTPOperationCompleted
Wireless Card (A and/or B) incompatible vendor detected
Wireless Card (A and/or B) firmware download failure detected
Wireless Card (A and/or B) not present
Wireless Card (A and/or B) general failure
Wireless Card (A and/or B) removal
Wireless Card (A and/or B) incompatible firmware detected
Wireless Card (A and/or B) voltage discrepancy detected
Wireless Card (A and/or B) incompatible vendor detected
Wireless Card (A and/or B) firmware download failure detected
Watch Dog Timer has expired
RADIUS Server is not responding or error communicating with RADIUS Server
Module has not been initialized
Device is rebooting
Task suspension has been detected
BootP failure detected (no response from BootP Server)
DHCP Client failure detected (no response from DHCP server)
Flash memory card detected empty
Flash memory data corrupted
FTP (upload or download) failure detected
TFTP (upload or download) operation initiated
TFTP (upload or download) operation completed
181