Proxim ORiNOCO AP-2500 User Manual page 210

Using the Command Line Interface
Name
Medium Distribution
MAC Address
Supported Data Rates
Transmit Rate
Supported Frequency Channels
Physical Layer Type
Regulatory Domain List
NOTE
There is an inter-dependent relationship between the Distance between APs and the Multicast Rate. In
general, larger systems operate a lower average transmit rates.
Distance between APs
Large
Medium
Small
Minicell
Microcell
Wireless Distribution System (WDS) Parameters
NOTE
These parameters only apply to 802.11b radios.
Name
WDS Table
Port Index
Status
Partner MAC Address
Type Values
Integer enable (default)
disable
PhyAddress 12 hex digits
Octet String Reported in 500 Kb/sec
intervals:
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
Integer32 Reported in 500 Kb/sec
intervals:
0 (auto fallback)
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
Octet String Depends on Regulatory
Domain
Integer dsss (direct sequence
spread spectrum) for
802.11b
DisplayString USA (FCC)
Canada (DOC)
Europe (ETSI)
Spain (SP)
France (FR)
Japan (MKK)
Multicast Rate
1 and 2 Mbits/sec
1, 2, and 5.5 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
1, 2, 5.5 and 11 Mbits/sec
Type Values
Table N/A
Integer 3.1 - 3.6 (Wireless A)
4.1 - 4.6 (Wireless B)
Integer enable (1)
disable (2) (default)
PhysAddress User Defined
Access CLI Parameter
RW meddendistrib
R macaddr
R suppdatarates
RW txrate
R suppchannels
R phytype
R regdomain
Access CLI Parameter
R wdstbl
R portindex
RW status
RW partnermacaddr
210