Proxim ORiNOCO AP-2500 User Manual page 93

Network Parameters
Acct-Request
– Username
– Called-Station-Id
– Calling-Station-Id
– Acct-Status-Type (Start/Stop/Alive)
– Acct-Session-ID
– Acct-Output-Octets
• Number of octets (bytes) sent by subscriber.
– Acct-Input-Octets
• Number of octets (bytes) received by subscriber.
– Acct-Output-Packets
• Number of packets sent by subscriber.
– Acct-Input-Packets
• Number of packets received by subscriber.
– Class
– Acct-Session-Time (Stop)
• Acct-Session-Time is calculated the following way (for each transmitted/retransmitted Acct-Stop):
Acct-Session-Time = time of last sent packet - subscriber login time.
– Acct-Terminate-Cause (Stop)
• 1 = User Requested; 4 = Idle Timeout; 5 = Session Timeout
– NAS-IP
– NAS-Port-Type
– NAS-Port
– Framed-IP
– Acct-Delay-Time
– Nomadix Vendor Specific Attributes
The AP-2500 supports the following Vendor Specific Attributes from Nomadix, Inc.:
• Nomadix-Bw-Up (integer)
• Nomadix-Bw-Down (integer)
• Nomadix-URL-Redirection (string)
• Nomadix-IP-Upsell (integer)
The AP-2500 will also wait for the receipt of an Accounting Reply message. If no reply is received, the AP will
retransmit the message based on the configuration of the
Notes:
• NAS stands for Network Access Server. This refers to the AP-2500.
• Vendor Specific Attributes are also referred to as VSAs.
Retransmission Options.
93