Wireless 802.11A Parameters - Proxim ORiNOCO AP-2500 User Manual

Using the Command Line Interface

Wireless 802.11a Parameters

Name
Wireless Interfaces
Network Name
Auto Channel Select (ACS)
DTIM Period
Operating Frequency Channel
RTS/CTS Medium Reservation
MAC Address
Supported Data Rates
Transmit Rate
Supported Frequency Channels
Physical Layer Type
Regulatory Domain List
NOTE
For 802.11a cards in Europe, Auto Channel Select is a read-only parameter; it is always enabled.
Type Values
Group N/A
DisplayString 2 – 31 characters
My Wireless Network A
(default)
My Wireless Network B
(default)
Integer enable (default)
disable
Integer 1 – 65535
(1 = default)
Integer 36 - 5.180 GHz
40 - 5.200 GHz
44 - 5.220 GHz
48 - 5.240 GHz
52 - 5.260 GHz (default
FCC)
56 - 5.280 GHz
60 - 5.300 GHz
64 - 5.320 GHz
Channels 36-64 are valid
for the FCC and ETSI
regulatory domains.
The following channels
are available in Japan:
34 - 5.170 GHz (default)
38 - 5.190 GHz
42 - 5.210 GHz
46 - 5.230 GHz
Integer 0 – 2347
Default is 2347 (off)
PhyAddress 12 hex digits
Octet String See "Transmit Rate"
Integer32 Reported in 500 Kb/sec
intervals:
0 - Auto Fallback
(default)
12 (6 Mbit/sec)
18 (9 Mbits/sec)
24 (12 Mbits/sec)
36 (18 Mbits/sec)
48 (24 Mbits/sec)
72 (36 Mbits/sec)
96 (48 Mbits/sec)
108 (54 Mbits/sec)
Octet String See Operating
Frequency Channel
Integer ofdm (orthogonal
frequency division
multiplexing) for 802.11a
DisplayString USA (FCC)
Canada (DOC)
Europe (ETSI)
Spain (SP)
France (FR)
Japan (MKK)
Access CLI Parameter
R wif
RW netname
RW autochannel
RW dtimperiod
RW channel
RW medres
R macaddr
R suppdatarates
RW txrate
R suppchannels
R phytype
R regdomain
211