List Of Networking Features - Proxim ORiNOCO AP-2500 User Manual

Introduction

List of Networking Features

The IEEE standards that governs wireless communications are different for the 2.4 GHz band and the 5 GHz band.
The table below compares the software features supported for each type of card in the AP-2500 device:
Feature
Number of stations per BSS
HTTP Server
Telnet / CLI
SNMP Agent
VLAN Support (2 User VLANs)
Emergency Reset to Default Configuration
DHCP Client
DHCP Server
TFTP
802.1d bridging
MAC Access Control Table
Ethernet Protocol Filtering
ICMP Echo Response (i.e., responds to pings)
Hardware Watchdog Timer
Automatic Channel Select
WEP
WEP Plus (Weak Key Avoidance)
WDS Relay
Remote Link Test
Link Test Responder
Medium Density Distribution
Distance between APs
Closed System
Interference Robustness
Load Balancing
AP List
SpectraLink VoIP Support
Fragmentation
Dynamic Frequency Selection (DFS)
*This feature is not available if you are using an ORiNOCO 802.11a/b ComboCard or a non-ORiNOCO client with 802.11b.
2.4 GHz 5 GHz
(802.11b) (802.11a)
up to 250 up to 50 This specifies the limits of each radio. Note that the
AP-2500's Public Space features can support a
maximum of 50 subscribers.
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes
yes yes Key lengths supported: 64-bit and 128-bit
(Note: Some products refer to 64-bit as "40-bit" and
128-bit as "104-bit". 128-bit encryption may not be
available with all 802.11b cards.)
yes no Available only one way (AP to client) if using an
ORiNOCO 802.11a/b ComboCard or a
non-ORiNOCO client.
yes no
yes* no
yes* no
yes* no
yes* no
yes no
yes no
yes no No client support for 802.11a
yes no No client support for 802.11a
yes no
yes yes For 802.11b, Fragmentation is implemented as part
of the Interference Robustness feature.
no yes DFS is required for 802.11a products sold in Europe
Comments
18