3.18 TROUBLE SET Screen
You can set the data related with the trouble messages and tune lock that are received
from the digital inputs.
The messages that you set in (1) and (2) in the Figure 3.18.1 will be displayed when the
ON signal is set for the trouble input, which enables you to identify the current trouble
status. Press the "CLEAR" button to clear the message.
(2)
(4)
(2)
(4)
(1) Button to Assign the channel : It is available for Asynchronous mode of IPC5000D.
Select the channel number to assign when trouble occur.
(2) Message number set button
Input the number that is displayed in the trouble input message list. When you input the
number displayed at the left side of the Figure 3.18.3, the message contents will be
TROUBLE
EXIT
TROUBLE 1
MESSAGE No.
FAN EOCR FAULT
TROUBLE 2
MESSAGE No.
WATER VALVE FAULT
TROUBLE DELAY
AT option
SYS SET
NET SET
EXIT
TROUBLE
TROUBLE 1
TROUBLE 2
TROUBLE 3
TROUBLE 4
TROUBLE DELAY
AT option
UNLOCK
SYS SET
NET SET
Fig. 3.18.1 Trouble and Tune Lock Setting Screen
03-02.WED
CH2
CH1
0
CH2
CH1
3
0
sec
LOCK
UNLOCK
INITIAL
TROUBLE
(a) IPC5000D
03-02.WED
0
FAN EOCR FAULT
1
EMERGENCY STOP!
2
WATER VALVE FAULT
3
PRESSURE FAULT
0
sec
LOCK
INITIAL
TROUBLE
(b) IPC5000S
- 75 -
12.59.00
(1)
(3)
(5)
12.59.00
(3)
(5)